The MTX TNP212DV includes the TNE212DV high-output dual 12" 1000W RMS ported subwoofer enclosure with included MTX amplifier. The best value subwoofer pack in in Australia & NZ! It’s an ideal solution for anyone looking for the easiest way to add bass to their vehicle without breaking their bank or going over the top. The TNP212DV is the perfect combination of performance and value ensuring that enthusiasts of all types can enjoy the hard hitting bass that MTX has built its reputation on for over 50 years

The MTX TNP212DV combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12" vented enclosure that has a single terminal cup to connect easily to the included amplifier. The Terminator subwoofers used in the enclosure include polypropylene dust-caps that are durable allowing them to survive the rigours of most trunks and are lightweight allowing them to efficiently move using less power. Each subwoofer can handle 500-watts RMS power, resulting in a power level of 1000-watts RMS/2000-watts Peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil helping to dissipate the heat generated during extended play.

MTX TNP212DV Highlights

  • MTX Dual 12" Enclosure
  • 2000W Peak Power, 1000W RMS Power Enclosure
  • 5/8" MDF Construction
  • Ported Design for a deep and powerful Bass Response
SPECIFICATIONS
Amplifier Topology Class D
Amplifier Power RMS/Max 500/1000 Watts x 1 @ 2Ω 
Signal to Noise Ratio 80dB
Frequency Response 20Hz - 200Hz
Maximum Input Signal 5V
Max Sensitivity 200mV
Low Pass Filter Variable 40Hz - 200Hz, 12dB/Oct
Subsonic Filter Variable 20Hz - 40Hz, 12dB/Oct
Subwoofer Dual 12"
RMS Power (Watts) 1000 (500 watts per sub)
Height 14"
Width 29.5"
Bottom Depth 13.5"
Top Depth 11.0"
Weight 56 lbs./28KG

What's in the box:

    • TNP212DV Dual 12" subwoofer enclosure - 2 OHM
    • TNA500D
    • 2 OHM Mono amplifier (2 x 30A fuses installed)
    • Remote bass control
    • 92" Remote bass control cable (RJ-25 plugs on each end)
    • 12" Speaker-level input harness
    • Two 3mm Allen keys
    • Two 2.5mm Allen keys
    • Two spare 30A fuses
    • Four 20mm Phillips-head screws
    • Two 10mm Phillips-head screws
    • Four flat-washers